Yaskawa VS-616PS5 Series Programming Manual User Manual
Page 99
Advertising
VS-616PS5 Programming Manual
99
Defines the operation time that accumulates in the timer.
After changing this setting, reinitialize the inverter in parameter A1-03. This initializa-
tion affects application dependent parameter settings (motor-related parameters, car-
rier frequency, inverter rated current, etc.).
O2-08 Cumulative Operation Time Selection
A
Setting
Description
0
Power-On time is the accumulated time (factory default).
The timer counts the time while the inverter power supply is turned ON as operation time.
1
Running time is the accumulated time. The timer counts the time while the inverter is running as
operation time.
Section O: Operator Parameters
O2 Key Selection
Advertising