Yaskawa MotionWorks IEC Hardware User Manual
Page 124
Advertising
MotionWorks IEC Hardware Configuration – 2013-03-26
121
11.
Click ‘Browse’ to locate the file.
12.
Click ‘Upload’ to upload the firmware file to the controller.
13.
After the version has been verified, a message box will indicate
the version currently in the controller, and the version about to be
loaded.
14.
Click on the ‘Update’ button to update the controller firmware.
15.
Do not power cycle the controller or attempt to click on
any of the menu bar links while the upgrade is taking
place! Wait for the page to indicate that the firmware upgrade
has completed.
Advertising