Yaskawa MotionWorks IEC Hardware User Manual
Page 22
Advertising
MotionWorks IEC Hardware Configuration – 2013-03-26
19
2. To copy parameters to multiple axes, select 'Paste Parameters to
Multiple Axes'
3. Select the axes to which the parameters will be copied. In the
example shown below, parameters from axis 16 will be copied to axes
17 and 18. Once the target drives are in the Selected window, click
the Paste button. Note that drives may require power cycle before for
some parameters to take effect. (See the Servopack manual for
details.)
Advertising