Yaskawa MotionWorks IEC Hardware User Manual
Page 72
MotionWorks IEC Hardware Configuration – 2013-03-26
69
Lower 3
Nibbles
Description
either the Connection Type or Priority of the
Connection.
0x109
Invalid Connection Size
0x110
Device not configured
0x111
RPI not supported. May also indicate problem with
connection time-out multiplier, or production inhibit
time.
0x113
Connection Manager cannot support any more
connections
0x114
Either the Vendor Id or the Product Code in the key
segment did not match the device
0x115
Product Type in the key segment did not match the
device
0x116
Major or Minor Revision information in the key
segment did not match the device
0x117
Invalid Connection Point
0x118
Invalid Configuration Format
0x119
Connection request fails since there is no controlling
connection currently open.