Yaskawa JAPMC-MC2303-E - Manual (Page 22)

2
Overview of 262IF-01 Module
2.1 Overview of 262IF-01 Module
2.1.1 Module Specifications
2-3
2.1.1 Module Specifications
This section provides the specifications of the 262IF-01 Module.
( 1 ) Hardware Specifications
( 2 ) Transmission Specifications
Item Specifications
Name 262IF-01
Model Number JAPMC-CM2303-E
Communication Port FL-net: 1 port
Indicators
Module status indicators LED
RUN (green)
TX (green)
ERR (red)
LNK (green)
RX (green)
FL-net status indicator LED
LINK (orange), 100M (green)
Switch TEST
Dimensions (mm) 125 × 95 mm (H × D)
Mass 80 g
Item Specifications
Ethernet
Transmission
Specifications
100BASE-TX 10BASE-T
Interface RJ-45 connector
Compliance Standard IEEE802.3u IEEE802.3i
Media Access Mode CSMA/CD
Communication Mode Full duplex/half duplex
Modulation Method Baseband
Transmission Path Type Star topology
Baud Rate 100 Mbps 10 Mbps
Maximum Number of
Cascade Connections
2 layers 4 layers
Transmission Path
Length
(Full length at repeater
usage)
100 m (205 m max. *1 ) 100 m (500 m max. *1 )
Transmission Media
Twisted pair cable (UTP)
Category 5 or 5e
Twisted pair cable (STP)
Category 5 or 5e (100 W)
Twisted pair cable (UTP)
Category 3, 4, 5, or 5e
Twisted pair cable (STP)
Category 3, 4, 5, or 5e (100 W)
Maximum Segment
Length
100 m (distance between hub and node at UTP usage)
Link Function
Support for auto-negotiation
(not possible to fix transmission and communication modes)
Support for Auto MDI/MDI-X
FL-net
Specifications
Transmission Control
System
Token passing
IP Address
Class C is used.
192. 168. 250.††† is used as standard (††† indicates a number from 1 to
254 and corresponds to a node number).
Port Number
For receiving: 3 ports (55000, 55001, and 55002) are used by the system.
For sending: 1 port (55003) is used by the system.
Protocol FA link protocol
Version 2.0