Yaskawa JAPMC-MC2303-E User Manual
Page 43
3
Mounting and Starting the Module
3.3 Setting the Communication Manager
3.3.2 Setting the Communication Manager
3-13
[ c ] Setting the Ethernet Communication Port
1.
Double-click Logical Port No. 2 in the Communication Manager Window to display the Logical Port
Setting Dialog Box.
2.
Select Ethernet or CP-218 under Port Kind in the Logical Port Setting Dialog Box and click the
Detail Button.
Ethernet and CP-218 set the same communication specifications. Either can be set for Ethernet communica-
tions.
The CP-218 Port Setting Dialog Box will be displayed.
3.
Enter the IP address of computer and click OFF for Default. Leave the other items on their default set-
tings. Click the OK Button to close the dialog box.
4.
The Logical Port Setting Dialog Box will be displayed again. Click the OK Button to return to the
Communication Manager Window. Check that the CP-218 (Ethernet connection) is assigned to Logi-
cal Port No. 2.
5.
Save the settings and restart the Communication Manager.
Refer to
Saving the Communication Port Settings and Restarting the Communication Manager on page 3-10
for the procedure.