Yaskawa JAPMC-MC2303-E - Manual (Page 64)

4
FL-net T
ransmission
Definition
4.2 FL-net Transmission Definition
4.2.4 Status Detail Window
4-11
Bit 6: Common memory setting completion
Displays whether the settings for common memory areas 1 and 2 have been completed on the Link Assignment
Tab Page.
ON = Complete, OFF = Incomplete
Bit 7: Address overlapping detection
Displays whether duplication of the I/O area address in the common memory has been detected.
ON = Detect (duplicate), OFF = Undetect
„
High-ranking Layer Status (Status of upper layer)
Status
Displays a status code of the upper layer status of the selected node.
Bit 0 to B: U_ERR_CODE
Not used.
Bit C: Reserve
Reserved by system. Always set to OFF.
Bit D: WARNING
Not used.
Bit E: ALARM
Not used.
Bit F: RUN/STOP
Displays an operating status of the upper layer.
ON = RUN (operating), OFF = STOP (stopped)
„
Network Information
Token monitoring time
Displays the network monitoring time set on the Transmission Parameter Tab Page.
9
10
11
12
13
14
15
16
17