Yaskawa JAPMC-MC2303-E User Manual
Page 56
4
FL-net T
ransmission
Definition
4.1 Displaying the FL-net Transmission Configuration Window
4.1.2 Displaying the FL-net Transmission Configuration Window from the Module Configuration Window
4-3
4.1.2 Displaying the FL-net Transmission Configuration Window
from the Module Configuration Window
As the result of executing self-configuration, all Option Modules connected to the Machine Controller will be dis-
played in the Controller Area of the Module Configuration Window. (Refer to
3.4.1 Executing Self-configuration
on
page 3-19
.
)
In the Controller Area, select the 262IF-01 cell, and then double-click the slot number cell for FL-net in the Module
Details Area. The FL-net Transmission Configuration Window (see next page) will be displayed.
In Online Mode, the FL-net transmission definitions data saved in the Machine Controller are displayed. In Offline
Mode, the definitions data saved in the personal computer on which MPE720 is running is displayed.
The FL-net Transmission Configuration Window is composed of four tab pages: Transmission Parameters, Link
Assignment, Link Status, and Status. These tab pages are used to set the definitions and monitor the settings.
If the Transmission Configuration Window is being opened for the first time, a “new file” message box will be dis-
played and the FL-net Transmission Configuration Window will be displayed when the OK Button is clicked.
<MP2300/MP2310/MP2300S Module Configuration Window>
Click.
1
Double-click.
2
<MP2100M/MP2200/MP2500MD Module Configuration Window>
Click.
1
Double-click.
2