Yaskawa JAPMC-MC2303-E - Manual (Page 98)

6
Message Send and Receive Functions
6.1 Message Send Function
6.1.5 Parameter Details for MSG-SND Function
6-13
( 5 ) PARAM05: Data Address
ΠFor the relationship among data address (PARAM05), data size (PARAM06), and holding register offset
(PARAM011), refer to 6.1.7 Relationship among the Data Address, Data Size, and Offset in the MSG-SND Function
on page 6-16.
[ a ] When Pro-Typ=1 (MEMOBUS)
PARAM05 sets an FL-net virtual address in the range of 0 to 65535 as the leading address of the data.
The address is input as a decimal or hexadecimal value.
ΠExample: To set a leading address of MW01000, set 1000 (decimal) or 3E8H (hexadecimal).
In FL-net, the offset address of the FL-net virtual address space (M_ADD) is specified by the data address (PARAM05)
and the remote CPU number (PARAM07). For details, refer to 6.1.6 Specifying an FL-net Virtual Address Space Using
the MSG-SND Function on page 6-15.
[ b ] When Pro-Typ=2 (non-procedure protocol)
Specify the transaction code in the leading register of the data address in decimal or hexadecimal value.
The following table lists transaction codes.
∗ Any value is valid as long as it is within the range.
Œ
Example: To set a leading address of MW10000, set 10000 (decimal) or 2710 (hexadecimal).
ΠFor notes at actual register input, refer to 6.4 Displaying a Register List and Notes at Register Input on page 6-30.
Message Type
Transaction Code
Request Response
Decimal Hexadecimal Decimal Hexadecimal
Transparent message 10000 to 59999* 2710 to EA5F* – –
Word block read 65005 FDED 65205 FEB5
Word block write 65006 FDEE 65206 FEB6
Network parameter read 65007 FDEF 65207 FEB7
Network parameter write 65008 FDF0 65208 FEB8
Stop command 65009 FDF1 65209 FEB9
Start command 65010 FDF2 65210 FEBA
Profile read 65011 FDF3 65211 FEBB
Log data read 65013 FDF5 65213 FEBD
Log data clear 65014 FDF6 65214 FEBE
Message loopback 65015 FDF7 65215 FEBF