Yaskawa JAPMC-MC2303-E User Manual
Page 46
3.3 Setting the Communication Manager
3.3.2 Setting the Communication Manager
3-16
( 4 ) Setting the CP-215 Communication Port
These settings are required to perform engineering communication via the CP-215 communication port of the 215AIF-
01 Module using the MPE720.
A CP-215PC/AT card must be mounted on the personal computer and set for the CP-215 connection. Contact your
Yaskawa representative for more information.
[ a ] Setting the CP-215 Communication Port
1.
Double-click Logical Port No. 4 in the Communication Manager Window.
The Logical Port Setting Dialog Box will be displayed.
2.
Select CP-215 under Port Kind in the Logical Port Setting Dialog Box and click the Detail Button.
The CP-215 Port Setting Dialog Box will be displayed.
3.
The Hardware Tab Page will be displayed. Select the type of CP-215PC/AT card mounted on the per-
sonal computer under CP-215 Type.
4.
Set the I/O port number of the mounted CP-215PC/AT card under Physical No. Set the I/O port num-
ber to 1 when using one CP-215PC/AT card. When using two or more cards, allocate ports 2, 3, and 4
sequentially.