Rose Electronics Orion X-series - Manual (Page 25)

Orion X Installation and Operations Manual 17
Control through the Java Tool
Requirements
The following requirements have to be met to use the Java Tool:
Computer with an installed Java Environment (JRE, version 1.6 or higher)
Java Tool software
Available network connection between the Java Tool and the matrix
Contact your system administrator concerning JRE and network connection.
Installation of the Java Tool
The Java Tool is available as a single executable program file that does not require a separate installation.
 Copy the tool after receiving the file to a directory on the computer.
If you have not received the Java Tool, contact Rose Electronics.
Computer Connection to the Matrix
For a connection between computer and matrix via your network, a standard network cable is required.
For a direct connection between computer and matrix, a crossover network cable is required.

Connect the appropriate network cable(s) to the RJ45 ports of the computer and the CPU board of the
matrix.
Starting the Java Tool
 Open the Java Tool by double clicking the program icon or use the <Enter> key of the keyboard.
Connecting to the Matrix
At least FTP rights are required.
1. Open the Java Tool.
2. Select Matrix > Connect in the menu bar.
3. Enter the IP address of the matrix in the popup input field according to the network configuration of the
Orion X.
4. Enter the user name and password for the Orion X.
5. Confirm the inputs with the OK button or reject with Cancel.