Rose Electronics Orion X-series - Manual (Page 95)

Orion X Installation and Operations Manual 87
Status LEDs at I/O boards:
Pos. LED
Status Description
1 Status 1 Light blue I/O board in boot process
Red flashing I/O board in registration process
Red/ Yellow flashing I/O board in Service Mode or firmware conflict with CPU board
Green flashing
Operating condition, I/O board registered at the matrix
Green I/O board de-registered (locking pin pulled out)
2 Status 2 White I/O board in boot process
Blue I/O board in registration process
Blue flashing Operating condition, communication active with CPU board active
Red flashing I/O board de-registered (locking pin pulled out)
Ports I/O Board
Figure 72. Port I/O Board Status LEDs
Status LEDs at the ports of the I/O boards:
Pos. LED
Status Description
1 Link Status (Orange) Off Port not activated
Flashing Port activated, no connection via interconnect cable
On
Connection via interconnect cable ok, data traffic active
2 Link Status (Green) Off Port not activated
Flashing Port activated, no connection via interconnect cable
On
Connection via interconnect cable ok, data traffic active
Fan Tray
Figure 73. Fan Tray Status LEDs
CATx SFP Fiber SFP Coax