Rose Electronics Orion X-series User Manual
Page 37
Orion X Installation and Operations Manual
29
Automatic ID
The settings for the automatic creation of CPU and CON devices by connecting a new extender unit are
handled in this menu. This menu can be accessed in the OSD and the Java Tool.
The following settings can be modified.
Field
Selection
Description
Enable Auto Config
Activated
Automatic creation of a new CPU or CON device if new
extender units are connected (default)
Deactivated
Function not active
ID Real CPU Device
Numerical value Initial value of the automatic ID for real CPUs (default value:
1000)
ID Virtual CPU Device
Numerical value Initial value of the automatic ID for virtual CPUs (default
value: 2000)
ID Real CON Device
Numerical value Initial value of the automatic ID for real CONs (default value:
3000)
ID Virtual CON Device
Numerical value Initial value of the automatic ID for virtual CONs (default
value: 4000)
Modifying Automatic ID Settings through the OSD
Select Configuration > System in the main menu.
Figure 22, Modifying Automatic ID Settings through OSD
Select between the following buttons:
Button Function
Cancel Reject changes
Save
Save changes