Rose Electronics Orion X-series - Manual (Page 51)

Orion X Installation and Operations Manual 43
User Macros
This menu is used to set up macro commands for switching, disconnection or user administration. This
menu can be accessed in the OSD and the Java Tool.
The macro commands are created for each user separately. A macro can execute up to 16 switching
commands successively. The execution of the macros is done via 'Hot Key' and the function keys <F1>-
<F16>.
Note: In order to execute user macros the user has to be logged in at the matrix.
Select between the following settings:
Field
Selection Description
Function
(01-16) Connect (P1=CON, P2=CPU) Set bidirectional connection from console P1 to
CPU P2
Connect Video (P1=CON, P2= CPU) Set video connection from console P1 to CPU
P2
Disconnect (P1=CON) Disconnect console P1
Logout User Logout current user
Set Real CPU (P1=VCPU, P2=RCPU) Assign a virtual CPU to a real CPU
Set Virtual CON (P1=RCON, P2=VCON) Assign a real console to a virtual console
Push (P1=CON) The user’s current KVM connection is
forwarded to console P1 and is changed to a
video only connection.
Push Video (P1=CON) The video signal of the user’s current
connection (KVM or video only) is forwarded to
console P1. The user’s connection remains
unchanged (KVM or video only).
Get (P1=CON) The user’s console gets a KVM connection to
the CPU that is currently connected to console
P1. The connection of console P1 is changed
into a video only connection.
Get Video (P1=CON) The user’s console gets a video only
connection to the CPU that is currently
connected to console P1. The connection of
console P1 remains unchanged (KVM or video
only).
P1 CON or CPU Device Name of CON or CPU device
P2 CON or CPU Device Name of CON or CPU device