Rose Electronics Orion X-series - Manual (Page 81)

Orion X Installation and Operations Manual 73
Performing the Update in Expert Mode (sequential Update)
1. Select Administration > Update EXT Firmware and select Expert Mode in the upper part of the
working area. All extenders available for update will be automatically selected and highlighted in
green.
Figure 62. Extender Update in Expert Mode – Step 1 (from the Java Tool)
2. Set the matrix into Service Mode upon request in the popup window or via Matrix > Activate
Service Mode in the menu bar.
Note: During Service Mode, all matrix functions are disabled on the I/O boards on which an update
is currently being performed. An OSD popup appears on all monitors connected to the matrix via a
CON device indicating Service Mode is active. Additionally, the Service Mode is indicated by a red
tool icon in the lower part of the working area.
Figure 63.Extender Update in Expert Mode – Step 1 (from the Service Mode of the OSD)