Rose Electronics Orion X-series - Manual (Page 56)

48 Orion X Installation and Operations Manual
Deleting Flex-Port Extender Units
It is not possible to delete Flex-Port extender units connected to the matrix.
Deleting Fixed Port Extender Units
To delete a fixed port extender unit (e. g. USB 2.0), proceed as follows:
1. Verify that the fixed port extender unit to be deleted is currently not assigned to a device.
2. Select the fixed port extender unit to be deleted in the selection list on the left side of the EXT
Units menu and confirm with the <Enter> key.
3. Press the Delete button.
4. Confirm the delete process with the Okay button.
Note: In order to make a fixed port available again for Flex-Port extender units after deleting a fixed port
extender unit, a restart of the matrix is necessary.
CPU Settings
New CPU devices are configured in this menu including their assignment to extenders. The assignment
helps to describe and switch more complex computer configurations (e.g. Quad-Head with USB 2.0) in the
matrix. This menu can be accessed in the OSD and the Java Tool.
Select between the following settings:
Field
Selection Description
ID Text ID of the CPU unit
Name Text Name of the CPU device
Virtual Device Activated Create a new CPU device as a virtual CPU
Deactivated Function not active
Allow Private Activated Allow switching to the respective CPU
device in Private Mode
Deactivated Function not active (default)
Force Private Activated Force switching to the respective CPU only
in Private Mode
Deactivated Function not active (default)
Fix Frame Activated Force showing a red frame when switching
to the respective CPU
Deactivated Function not active (default)