Rose Electronics Orion X-series - Manual (Page 88)

80 Orion X Installation and Operations Manual
Select between the following switching functions:
Function
Keyboard Command
Set a video only connection. <Space>
Set a KVM connection. <Enter>
Set a KVM connection in private mode (video sharing disabled). <Shift> + <Enter>
Disconnect the CON device from the CPU device.
<Backspace>
KVM Switching through the Java Tool
There are two methods to perform switching operations for the Orion X via the Java Tool, as described
below.
Method 1:
 Select Control > Extended Switch in the task area.
Figure 67. Extended KVM Switching through Java Tool - Method 1 (from Extended Switch Option)
All connected consoles and their CPU connections are shown in columns in the working area in this menu.
Switching operations can only be performed in online mode. This means an active network connection
between the matrix and the Java Tool is needed.
 To set a
KVM connection between a console and a CPU, double-click on the corresponding selection
box within the Full Access column and select the requested CPU.
 To set a video connection between a console and a CPU, double-click on the corresponding selection
box within the Video Only column and select the requested CPU.
 To set a Private Mode connection between a console and a CPU, double-click on the corresponding
selection box within the Private Mode column and select the requested CPU.
Note: CPUs whose respective console does not have access rights, will not appear in the list.