Rose Electronics Orion X-series - Manual (Page 39)

Orion X Installation and Operations Manual 31
Access Control
The access control configuration is set in this menu. This menu can be accessed in the OSD and the Java
Tool.
The following settings can be modified.
Field Selection Description
Force User Login Activated Users must login with a user name and a password once to
enter OSD. Thereafter the user remains logged in until he
explicitly logs out or an auto logout is effected.
Note: When using the Force User Login function, console
favorites and console macros still remain active.
Deactivated Function not active (default)
Enable User ACL Activated CPU access is restricted according to the permissions in the
ACL (Access Control List).
User login is required.
Switching by keyboard 'Hot Keys' requires a prior login.
Deactivated Function not active (default)
Enable Console ACL Activated CPU access is restricted according to the permissions in the
respective Console ACL (Access Control List). No login
required.
Deactivated Function not active (default)
Enable new User Activated Newly created users automatically receive access to all CPUs.
Deactivated Function not active (default)
Enable new CON Activated Newly created CON devices automatically receive access to
all CPUs.
Deactivated Function not active (default)
Auto Disconnect Activated Upon opening the OSD, the console will be automatically
disconnected from the current CPU.
Deactivated Function not active (default)
OSD Timeout 0-999 seconds Period of inactivity after which OSD will be closed
automatically.
Select 0 seconds, for no timeout (default: 0 seconds)
Auto Logout 0-999 minutes Period of inactivity of a logged-in user at a console after which
he will be automatically logged out at this console.
There might be a disconnect because of the logout, depending
on the defined rights in each CON and user ACL.
Select 0 minutes for an automatic user logout when leaving
OSD.
Using the setting -1 allows the user to be logged in
permanently, until a manual logout is executed.
The timer is not active as long as the OSD is open.
(default: 0 minutes)