Loading originals, Placing originals on the platen, Loading originals -2 – Kyocera Ecosys m2040dn User Manual

Page 162: Placing originals on the platen -2, Caution

Advertising
background image

5-2

Operation on the Machine > Loading Originals

Loading Originals

Load the originals on the platen or document processor, depending on the original size, type, volume, and function.
• Platen: Place the sheet, book, postcards, and envelopes.
• Document Processor: Place the multiple originals. You can also place the two sided originals. (Only on models with a

duplex scanning function.)

Placing Originals on the Platen

You may place books or magazines on the platen in addition to ordinary sheet originals.

When you place envelopes or cardstock on the platen

NOTE

s

For details on Original Orientation, refer to the following:

Original Orientation (page 6-16)

NOTE

For the procedure for feeding envelopes or cardstock, refer to the following:

When you load envelopes or cardstock in the multipurpose tray (page 5-7)

CAUTION

Do not leave the document processor open as there is a danger of personal injury.

IMPORTANT

• Do not push the document processor forcefully when you close it. Excessive pressure may crack the platen glass.
• When placing books or magazines on the machine, do so with the document processor in the open position.

2

1

1 Put the scanning side facedown.

2 Align it flush against the original

size indicator plates with the back
left corner as the reference point.

2

1

1 Put the scanning side facedown.

2 Align it flush against the original

size indicator plates with the back
left corner as the reference point.

Advertising
This manual is related to the following products: