Kyocera Ecosys m2040dn - Manual (Page 273)

8-27
Setup and Registration (System Menu) > System Menu
Power Off Rule (models for
Europe) Select whether or not the machine enters Power Off mode for the following function. Select
[On] to set the Power Off mode.
•
Network
• FAX *2
• USB Cable
• USB Host
• RAM Disk
• Remote Diag.
Value : Off, On
NOTE
Even when any of the functions is set to [On], if [FAX] is set to [Off], the machine does not
enter Power Off Mode.
Even when [Network] or [USB Cable] is set to [Off], if the machine does not communicate with
the other devices, the machine will enter Power Off Mode.
Power Off Timer (models for
Europe) Select whether to turn off the power automatically after a period of inactivity.
Value : 1 hour, 2 hours, 3 hours, 4 hours, 5 hours, 6 hours, 9 hours, 12 hours, 1 day, 2
days, 3 days, 4 days, 5 days, 6 days, 1 week
Auto Err. Clear If an error occurs during processing, processing stops to wait for the next step to be taken by
the user. In the Auto Error Clear mode, automatically clear the error after a set amount of time
elapses.
Value : Off, On
Err. Clear Timer If you select [On] for Auto Error Clear, set the amount of time to wait before automatically
clearing errors.
Value : 5 to 495 seconds (in 5 second increments)
NOTE
This function is displayed when [Auto Err. Clear] is set to [On].
Unusable Time *2 Set a time period during which the machine will not print received faxes.
FAX Operation Guide
Ping Timeout Set the time until timeout occurs when [Ping] is executed in "System/Network".
Value : 1 to 30 seconds (in 1 second increments)
*1 Displayed only when the optional Card Authentication Kit is activated.
*2 Displayed only when the optional FAX Kit is installed.
Item Description