Kyocera Ecosys m2040dn - Manual (Page 337)

10-13
Troubleshooting > Troubleshooting
Printouts are wrinkled. Is the paper loaded correctly? Load the paper correctly. page 3-2
― Turn the orientation 180 degrees around
in which the paper is positioned. page 3-2
Is the paper damp? Replace the paper with new paper. page 3-2
Printouts are curled. ― Turn the paper over in the cassette, or
turn the orientation 180 degrees around
in which the paper is positioned. page 3-2
Is the paper damp? Replace the paper with new paper. page 3-2
I can't install the printer
driver. Are you trying to install the driver using
a host name with Wi-Fi or Wi-Fi Direct
enabled? Specify an IP address instead of a host
name. ―
Cannot print. Is the machine plugged in? Plug the power cord into an AC outlet. ―
Is the machine powered on? Turn on the power switch. page 2-10
Are the USB cable and network cable
connected? Connect the correct USB cable and
network cable securely. page 2-8
Is the print job paused? Resume printing. page 7-13
Cannot print with USB
memory.
USB memory not
recognized. Is the USB host blocked? Select [Unblock] in the USB host
settings. page 8-17
― Check that the USB memory is securely
plugged into the machine. ―
While "Auto-IP" is set to
[On], the IP address is not
assigned automatically. Is a value other than "0.0.0.0" entered
for the IP address of TCP/IP(v4)? Enter "0.0.0.0" for the IP address of
TCP/IP(v4). page 2-18
Symptom Checkpoints Corrective Actions
Reference
Page