Kyocera Ecosys m2040dn - Manual (Page 343)

10-19
Troubleshooting > Troubleshooting
E
F
Cannot duplex print on
this paper.
↑↓ (Displayed alternately)
Press OK to using MP
Tray.
Did you select a paper size/type
that cannot be duplex printed? Select [Paper] to select the
available paper. Select the [OK] key
to print without using Duplex
function. ―
Cannot read data in this
ID Card. ― In registration process, the ID card
information was not read correctly.
Hold again the ID card over the ID
card reading part.
If the same message still appears,
the ID card may not be compatible
with this product. Change it to
another ID card. ―
Cannot recognize. ― Make sure your ID card has been
registered. Card
Authentication
Kit (B)
Operation
Guide
Cannot use this
function.
>> ##### ― This job is canceled because it is
restricted by User Authorization or
Job Accounting. Select the [OK] key. ―
Close # cover. Is there any cover which is open? Close the cover indicated on the
screen. ―
Close the document
processor and its cover. Is the document processor open? Close the document processor. ―
Cooling…
Please wait. ― The machine is under the
adjustment to maintain its quality.
Please wait. ―
Message Checkpoints Corrective Actions
Reference
Page
Error occurred. Turn the
power switch off and on. ― System error has occurred. Turn the
power switch OFF and then ON. ―
Message Checkpoints Corrective Actions
Reference
Page
Failed to store job
retention data. Job is
canceled. — The job is canceled. Select the [OK]
key. —
FAX memory is full. — FAX cannot be performed any more
due to insufficient memory. The job
is canceled. Select the [OK] key. FAX
Operation
Guide
Message Checkpoints Corrective Actions
Reference
Page