Send, Send -4 – Kyocera Ecosys m2040dn User Manual
Page 204
6-4
Using Various Functions > Functions Available on the Machine
Send
For details on each function, see the table below.
Key
Function
Description
Reference
page
Select the color mode setting.
Specify the original size to be scanned.
Select original image type for best results.
Select fineness of scanning resolution.
Select size of image to be sent.
Adjust the zoom to reduce or enlarge the image.
Orig. Orientation
Select the orientation of the original document top
edge to scan correct direction.
Scan the documents of different sizes that are set in
the document processor all at once.
Scans a large number of originals in separate
batches and then produce as one job.
Specify the image file format. Image quality level
Adds subject and body when sending a document.
JobFinish Notice
Sends E-mail notice when a job is complete.
FAX Resolution
Select fineness of images when sending FAX.
Refer to the
FAX
Operation
Guide.
FAX Delayed TX
Set a send time.
FAX Direct TX
Sends FAX directly without reading original data
into memory.
FAX RX Polling
Dial the destination and receive documents for
Polling Transmission stored in the polling box.
FAX TX Report
Print a report of fax transmission results.
Duplex
Select the type and orientation of the binding based
Encrypts images when sending via FTP.
Creates several files by dividing scanned original
data page by page, and sends the files.
Adjusts the sharpness of image outlines.
You can adjust the contrast between light and dark
Backgrnd Density
Removes dark background from originals, such as
When there are blank pages in a scanned
document, this function skips the blank pages and
prints only pages that are not blank.
NOTE
Funtions that can be used with fax server transmission are as follows:
Original Size, Duplex, Density, Original Image, FAX TX Resolution, Continuous Scan