Command center rx, Command center rx -45 – Kyocera Ecosys m2040dn User Manual

Page 93

Advertising
background image

2-45

Installing and Setting up the Machine > Command Center RX

Command Center RX

If the machine is connected to the network, you can configure various settings using Command Center RX.

This section explains how to access Command Center RX, and how to change security settings and the host name.

Command Center RX User Guide

Settings that the administrator and general users can configure in Command Center RX are as follows.

NOTE

To fully access the features of the Command Center RX pages, enter the User Name and Password and click [Login].
Entering the predefined administrator password allows the user to access all pages, including Document Box,
Address Book, and Settings on the navigation menu. The factory default setting for the default user with administrator
privileges is shown below. (Upper case and lower case letters are distinguished (case sensitive).)

Login User Name:

Admin

Login Password:

Admin

Setting

Description

Administ-

rator

General

User

Device
Information

The machine's structure can be checked.

Job Status

Displays all device information, including print and scan jobs, storing jobs,
scheduled jobs, and job log history.

Document Box

Configures settings related to the Job Box.

-

Address Book

Create, edit, or delete addresses and address groups.

*1

*1 The logged in user may not be able to configure some settings, depending on the permissions of the user.

Device Settings

Configure the advanced settings of the machine.

-

Function Settings

Configure the advanced function settings.

-

Network Settings

Configure the network advanced settings.

-

Security Settings

Configure the security advanced settings.

-

Management
Settings

Configure the advanced management settings.

-

NOTE

• FAX functions are available only on products with the fax function installed.

• Here, information on the FAX settings has been omitted.

FAX Operation Guide

Advertising
This manual is related to the following products: