Kyocera Ecosys m2040dn - Manual (Page 252)

8-6
Setup and Registration (System Menu) > System Menu
Admin Rpt Set.
[System Menu/Counter] key > [▲] [▼] key > [Report] > [OK] key > [▲] [▼] key > [Admin Rpt Set.] > [OK] key
Configure settings for Outgoing FAX report and Incoming FAX report.
FAX Operation Guide
Result Rpt Set.
[System Menu/Counter] key > [▲] [▼] key > [Report] > [OK] key > [▲] [▼] key > [Result Rpt Set.] > [OK] key
Job Log History
[System Menu/Counter] key > [▲] [▼] key > [Report] > [OK] key > [▲] [▼] key > [Job Log History] > [OK] key
Item Description
Send Result Automatically print a report of transmission result when a transmission is complete.
E-mail/Folder Automatically print a report of transmission result when E-mail or SMB/FTP transmission is
complete.
Value : Off, On, Error Only
FAX *1
*1 Only on products with the fax function installed.
FAX Operation Guide
CancelBeforeSend *2
*2 When "E-mail/Folder" and "FAX" are set to [Off], this function will not be displayed.
Print a send result report if the job is canceled before being sent.
Value : Off, On
Dest. Info. *2 Select the Recipient Format for the send result report.
Value : Dest. or Name, Dest. and Name
FAX RX Result
*1
FAX Operation Guide
JobFinish Notice Attaches sent images to job finish notices.
Value : Do Not Attach Image, Attach SendImage
Item Description
Auto Sending This function automatically sends the log history to the specified destinations whenever a set
number of jobs has been logged.
Value : Off, On
NOTE
If [On] is selected, specify the number of job histories. The setting range is 1 to 16.
Send History You can also send the log history to the specified destinations manually.
Destination Set the destination to which log histories are sent. Only E-mail address can be set.
Subject Set the subject automatically entered when sending log histories by E-mail.
Value : Up to 60 characters
Personal Info. Select whether to include personal information in the job log.
Value : Include, Exclude