Kyocera Ecosys m2040dn - Manual (Page 263)

8-17
Setup and Registration (System Menu) > System Menu
I/F Block Set.
[System Menu/Counter] key > [▲] [▼] key > [System/Network] > [OK] key > [▲] [▼] key > [I/F Block Set.] > [OK] key
This allows you to protect this machine by blocking the interface with external devices such as USB hosts.
Security Level
[System Menu/Counter] key > [▲] [▼] key > [System/Network] > [OK] key > [▲] [▼] key > [Security Level] > [OK] key
Restart
[System Menu/Counter] key > [▲] [▼] key > [System/Network] > [OK] key > [▲] [▼] key > [Restart] > [OK] key
Op Functions
[System Menu/Counter] key > [▲] [▼] key > [System/Network] > [OK] key > [▲] [▼] key > [Op Functions] > [OK] key
Item Description
USB Host This locks and protects the USB host.
Value : Unblock, Block
USB Device This locks and protects the USB interface connector (USB Device).
Value : Unblock, Block
USB Storage This locks and protects the USB memory slot.
Value : Unblock, Block
NOTE
This function is available when USB Host is set to [Unblock].
IMPORTANT
After changing the setting, restart the network or turn the machine OFF and then ON.
Item Description
Security Level Specify the security level.
Value
Low: This mode is used during maintenance. Do not use normally.
High: This is the security setting we recommend. Use this setting normally.
Very High: In addition to [High] setting, this setting disables the machine settings to be
changed from external command.
Item Description
Restart Restart the machine without turning the power switch off. Use this to deal with any unstable
operation by the machine. (Same as the computer restart.)
Item Description
Op Functions You can use the optional applications installed on this machine.
Optional Applications (page 11-6)