PLANET WGSW-5242 - Manual (Page 174)

User’s Manual of WGSW-5242
174
You can change these settings, if desired, after you log on. This management method is often preferred because you can
remain connected and monitor the system during system reboots. Also, certain error messages are sent to the serial port,
regardless of the interface through which the associated action was initiated. A Macintosh or PC attachment can use any
terminal-emulation program for connecting to the terminal serial port. A workstation attachment under UNIX can use an emulator
such as TIP.
5.2 Telnet login
The Managed Switch also supports telnet for remote management. The switch asks for user name and password for remote
login when using telnet, please use “admin” for user name and password.
Figure 5-4
Telnet screen