Static-address add, Static-address delete, 7 mgmt command – PLANET WGSW-5242 User Manual
Page 215: Mgmt-accesslist ipaddr, Mgmt-accesslist enable
User’s Manual of WGSW-5242
215
static-address add
Description:
This command is used to add static mac address
Syntax:
static-address add
<mac addr> vid <vlan-ID> port <port-ID>
Parameters:
<mac addr> vid <vlan-ID> port <port-ID>
Mode
Global Config
static-address delete
Description:
This command is used to delete static mac address
Syntax:
static-address delete
<mac addr> vid <vlan-ID>
Parameters:
<mac addr> vid <vlan-ID>
Mode
Global Config
6.3.7 Mgmt Command
mgmt-accesslist ipaddr
Description:
This command specifies a management access IP for the DUT, up to 8 IP address can be set.
Syntax:
mgmt-accesslist ipaddr
<IP addr>
Parameters:
<IP addr>
Mode
Global Config
mgmt-accesslist enable
Description:
This command enables management access list. Only the IP address specified in the management list is allowed to access
DUT.
Syntax:
mgmt-accesslist enable
Mode
Global Config