PLANET WGSW-5242 - Manual (Page 191)

User’s Manual of WGSW-5242
191
show port-security port
Description:
This command is used to specify an switch interface
Syntax:
show port-security port
<port-ID>
Parameters:
<port-ID>
Mode
Privileged Mode
show port-security all
Description:
This command is used to displays all interfaces’ status
Syntax:
show port-security all
Mode
Privileged Mode
show rate-limit
Description:
This command is used to displays ingress and egress rate limit information
show rate-limit port
Description:
This command is used to specify an switch interface
Syntax:
show rate-limit port <port-ID
>
Parameters:
<port-ID
>
Mode
Privileged Mode
Example
Switch#Show rate-limit port 1
Switch#Show rate-limit port g1
show rate-limit all
Description: