10 network command, Network mgmt-vlan, Network parms – PLANET WGSW-5242 User Manual
Page 219: Network protocol, Network dhcp-relay, Network dhcp-relay mode
Advertising
User’s Manual of WGSW-5242
219
6.3.10 Network Command
network mgmt-vlan
Description:
This command changes management vlan.
Syntax:
network mgmt-vlan
<vlan-ID>
Parameters:
<vlan-ID>
Mode
Global Config
network parms
Description:
This command configures static IP address of the switch.
Syntax:
network parms
<IP addr> <subnet mask> <gateway>
Parameters:
<IP addr> <subnet mask> <gateway>
Mode
Global Config
network protocol
Description:
This command configure switch dhcp client.
Syntax:
network protocol
{dhcp|none}
Parameters:
{dhcp|none}
Mode
Global Config
network dhcp-relay
Description:
Configure switch dhcp relay functions.
network dhcp-relay mode
Description:
Advertising