Port-all portsec-lockmode, Port-all portsec-lockmode none, Port-all portsec-lockmode static – PLANET WGSW-5242 User Manual
Page 223: Port-all portsec-lockmode dynamic max-entries, Port-all rate-limit, Port-all rate-limit egress
User’s Manual of WGSW-5242
223
port-all portsec-lockmode
Configure port security.
port-all portsec-lockmode none
Description:
This command disable port security.
Syntax:
port-all portsec-lockmode none
Mode
Global Config
port-all portsec-lockmode static
Description:
This command enable static lock mode.
Syntax:
port-all portsec-lockmode static
Mode
Global Config
port-all portsec-lockmode dynamic max-entries
Description:
This command enable limited dynamic lock mode.
Syntax:
port-all portsec-lockmode dynamic max-entries
<0-24>
Parameters:
<0-24>
Mode
Global Config
port-all rate-limit
Description:
Configure rate limit value on all ports.
port-all rate-limit egress
Description:
This command specifies egress rate limit.
Syntax:
port-all Rate-Limit egress
<value>
Parameters:
<value>