PLANET WGSW-5242 - Manual (Page 179)

User’s Manual of WGSW-5242
179
6.2 Privileged Mode commands
6.2.1 Cable-diag Port Command
cable-diag port
Description:
This command is used to proceed cable diagnostic
Syntax:
cable-diag port
<port ID>
Parameters:
<port-list> specifies the ports to be set. If not entered, all ports are set.
Mode
Privileged Mode
Example
Switch# cable-diag port 1
6.2.2 Clear Command
clear arl dynamic
Description:
This command is used to Clear dynamic arl table entries.
Syntax:
clear arl dynamic
Mode
Privileged Mode
clear arl static
Description:
This command is used to clear static arl table entries
Syntax:
clear arl static mac
<mac-addr>
Parameters:
<mac-addr>
Mode
Privileged Mode