PLANET WGSW-5242 - Manual (Page 93)

User’s Manual of WGSW-5242
93
(Destination IP Address)
• MASK
Defines the destination IP address mask
• SRC Port Defines the TCP/UDP source port to which the ACE is matched. This field is active only if
800/6-TCP or 800/17-UDP is selected in the Select from List drop-down menu.
The possible field range is 0 - 65535
• DST Port Defines the TCP/UDP destination port. This field is active only if 800/6-TCP or
800/17-UDP is selected in the Select from List drop-down menu.
The possible field range is 0 - 65535
• Packet Type Where selects from a protocols list on which ACE can be based. The possible field values
are:
• ICMP, which indicates that the Internet Control Message Protocol (ICMP) is used to
classify network flows.
• IGMP, which indicates that the Internet Group Management Protocol (IGMP) is used
to classify network flows.
• TCP, which indicates that the Transmission Control Protocol is used to classify
network flows.
• UDP, which indicates that the User Datagram Protocol is used to classify network
flows.
• IP, which indicates that all IPv4 frames are used to classify network flows.
• GRE , which indicates that the Generic Routing Encapsulation (GRE) protocol is used
to classify network flows.
MAC ACL
• MAC SA Matches the source MAC address to which packets are addressed to the ACE. And it's
format is XX-XX-XX-XX-XX-XX.
• MASK
Defines the source MAC address mask.
• MAC DA Where matches the destination MAC address to which packets are addressed to the
ACE. And it's format is XX-XX-XX-XX-XX-XX.
• MASK
Defines the destination MAC address mask.
• Ether Type
Means destination TCP/UDP port number.
The range is from 1 to 65535.
• 802.1Q VLAN ID When "Specific" is selected for the VLAN ID filter, you can enter a specific VLAN ID
number. The allowed range is 1 to 4095. A frame that hits this ACE matches this VLAN ID
value.
• Add Entry Inserts this ACL entry.