PLANET WGSW-5242 - Manual (Page 220)

User’s Manual of WGSW-5242
220
This command configures dhcp relay mode.
Syntax:
network dhcp-relay mode
{enable|disable}
Parameters:
{enable|disable}
Mode
Global Config
network dhcp-relay server
Description:
This command configures dhcp-relay server ip-address.
Syntax:
network dhcp-relay server
<A.B.C.D>
Parameters:
<A.B.C.D>
Mode
Global Config
network dhcp-relay vlan
Description:
Configure dhcp-relay option-82 vlan information.
network dhcp-relay vlan <vlan-ID> add
Description:
This command enters a vlan which will be enable DHCP-relay option82.
Syntax:
network dhcp-relay vlan <vlan-ID> add
Mode
Global Config
network dhcp-relay vlan <vlan-ID> remove
Description:
This command enters a vlan which will be disable dhcp-relay option82.
Syntax:
network dhcp-relay vlan <vlan-ID> remove
Mode
Global Config