PLANET WGSW-5242 - Manual (Page 266)

User’s Manual of WGSW-5242
266
ipsrcgd retry interval
Description:
This command is used to retry inactive entries after a interval.
Syntax:
ipsrcgd retry interval
<0-1440>
Parameters:
<0-1440>
Mode
Global Config
6.4 Interface Config mode commands
6.4.1 Exit Command
exit
Description:
Exit current shell
Syntax:
exit
Mode
Interface Config
6.4.2 dot1x Command
Set 802.1x port control.
Description:
Set auto-authorized or force authorized on ports
Syntax:
802.1x port-control
{enable|disable}
Parameters:
{enable|disable}
Mode
Interface Config
6.4.3 LACP Command
lacp admin
Description:
Configure admin key of port