Access-list name <word> {enable|disable, Access-list name <word> set priority, Access-list name <word> set ip-mode src ip – PLANET WGSW-5242 User Manual
Page 250: Access-list name <word> set ip-mode dst ip
User’s Manual of WGSW-5242
250
access-list name <WORD> {enable|disable}
Description:
This command enables/disables the ACL entry.
Syntax:
access-list name <WORD> {enable|disable}
Mode
Global Config
access-list name <WORD> set priority
Description:
This command specifies ACL entry priority.
Syntax:
access-list name <WORD> set priority
<0-65535>
Parameters:
<0-65535>
Mode
Global Config
access-list name <WORD> set IP-mode SRC IP.
Description:
This command specifies a source IP address.
Syntax:
access-list name <WORD> set IP-mode SRC IP
<IP-addr> <mask-addr>
Parameters:
<IP-addr>
<mask-addr>
Mode
Global Config
access-list name <WORD> set IP-mode DST IP
Description:
This command specifies a destination IP address.
Syntax:
access-list name <WORD> set IP-mode DSP IP
<IP-addr> <mask-addr>
Parameters:
<IP-addr>
<mask-addr>
Mode
Global Config