PLANET WGSW-5242 - Manual (Page 254)

User’s Manual of WGSW-5242
254
This command set add/remove dynamic arp on specified vlan.
Syntax:
arp dynamic vlan
{add|remove} from < vlan -id> to < vlan -id>
Parameters:
{add|remove}
< vlan -id>
Mode
Global Config
Example
Swtich<Config># arp dynamic vlan add from 1 to 1
Swtich<Config># arp dynamic vlan remove from 1 to 1
arp static
Description:
This command set arp static address table for mac address with IP Address.
Syntax:
arp static
{add|delete} vid <1~4094> ip <A.B.C.D> mac <mac-address>
Parameters:
{add|delete}
<1~4094>
<A.B.C.D>
<mac-address>
Mode
Global Config
6.3.20 Dos Command
dos land
Description:
This command enables and disables land-type attacks prevention.
Syntax:
dos land
{enable|disable}
Parameters:
{enable|disable}
Mode
Global Config