PLANET WGSW-5242 User Manual
Page 67
User’s Manual of WGSW-5242
67
The page contains the following fields:
Object
Description
•
Port
This is the logical port number for this row.
•
GVRP Mode
When the checkbox is checked, GVRP is enabled on the interface
•
Join Periods (centisecs) The interval between transmitting requests/queries to participate in a VLAN group.
Range: 20-1000 centiseconds.
Default: 20 centiseconds
•
Leave Periods
(centisecs)
The interval a port waits before leaving a VLAN group. This time should be set to
more than twice the join time. This ensures that after a Leave or LeaveAll message
has been issued, the applicants can rejoin before the port actually leaves the
group.
Range: 60-3000 centiseconds
Default: 60 centiseconds
•
Leave All Period
(centisecs)
The interval between sending out a LeaveAll query message for VLAN group
participants and the port leaving the group. This interval should be considerably
larger than the Leave Time to minimize the amount of traffic generated by nodes
rejoining the group.
Range: 500-18000 centiseconds;
Default: 1000 centiseconds