PLANET WGSW-5242 - Manual (Page 208)

User’s Manual of WGSW-5242
208
vlan lag vlan < vlan-id> exclude
Description:
This command is used to remove lag from a vlan
Syntax:
vlan lag vlan < vlan-ID> exclude
lags <lag-ID>
Parameters:
<lag-ID>
Mode
Global Config
vlan lag vlan <vlan-ID> untagged
Description:
This command is used to set to untagged lag.
Syntax:
vlan lag vlan <vlan-ID> untagged
lags <lag-ID>
Parameters:
<lag-ID>
Mode
Global Config
vlan lag vlan <vlan-ID> tagged
Description:
This command is used to set to tagged lag.
Syntax:
vlan lag vlan <vlan-ID> tagged
lags <lag-ID>
Parameters:
<lag-ID>
Mode
Global Config
6.3.3 Bridge Command
bridge
Description:
This command is used to configure switch aging time.
Syntax:
bridge aging-time
<0-1048575>
Parameters:
<0-1048575>