PLANET WGSW-5242 - Manual (Page 274)

User’s Manual of WGSW-5242
274
6.4.8 Spanning Tree Command
spanning-tree cost
Description:
This command configure RSTP port path cost, path cost value:0~200000000.
Syntax:
spanning-tree cost
<pathcost>
Parameters:
<pathcost>
Mode
Interface Config
spanning-tree edge
Description:
This command configure edge property
Syntax:
spanning-tree edge
{enable|disable}
Parameters:
{enable|disable}
Mode
Interface Config
Example
Switch(Interface 1)# spanning-tree edge enable
spanning-tree force-p2plink
Description:
This command configure force point to point link mode.
Syntax:
spanning-tree force-p2plink
{auto|enable|disable}
Parameters:
{auto|enable|disable}
Mode
Interface Config
spanning-tree migration-check
Description:
This command re-checks the appropriate BPDU format to send on this port