3 global config mode commands, 1 exit command, Exit – PLANET WGSW-5242 User Manual
Page 204: 2 vlan command, Vlan add, Vlan add number, Vlan add range, 3 global config mode commands 6.3.1 exit command
Advertising
User’s Manual of WGSW-5242
204
6.3 Global Config mode commands
6.3.1 Exit Command
exit
Description:
This command is used to exit current shell
Syntax:
exit
Mode
Global Config
6.3.2 VLAN Command
This command is used to configure vlan
vlan add
Description:
This command is used to create a new vlan or some vlans
vlan add number
Description:
This command enter a vlan ID
Syntax:
vlan add number
<vlan-ID>
Parameters:
<vlan-ID>
Mode
Global Config
vlan add range
Description:
This command enter a range of vlan ID
Syntax:
vlan add range
from < vlan-ID > to <vlan-ID>
Parameters:
< vlan-ID > to <vlan-ID>
Mode
Global Config
Advertising