Qos port-based status, 7 rate-limit command, Rate-limit egress enable token bsize – PLANET WGSW-5242 User Manual
Page 271: Rate-limit egress disable, Rate-limit ingress
Advertising
User’s Manual of WGSW-5242
271
Syntax:
qos port-based priority
<0..7>
Mode
Interface Config
Qos port-based status
Description:
This command is used to set port-based status.
Syntax:
qos port-based status
{enable|disable}
Parameters:
{enable|disable}
Mode
Interface Config
6.4.7 Rate-limit Command
rate-limit egress enable token bsize
Description:
This command limits egress rate, which the unit is Kbps.
Syntax:
rate-limit egress enable token bsize
<Burst Size Value>
Parameters:
<Burst Size Value>
Mode
Interface Config
rate-limit egress disable
Description:
This command disable egress rate limit.
rate-limit ingress
Description:
This command limits ingress rate, which the unit is Kbps.
Syntax:
rate-limit ingress
<rate>
Parameters:
<rate>
Advertising