3 set, 5 port command, Admin-mode – PLANET WGSW-5242 User Manual
Page 269: Auto-negotiate, 802 . 3 set
User’s Manual of WGSW-5242
269
Syntax:
lldp tlvs-tx {enable | disable} option 8021 {pvid | vlanname | protocol-id}
Parameters:
{enable | disable}
{pvid | vlanname | protocol-id}
Mode
Interface Config
Example
switch(interdface 1)#lldp tlvs enable option 8021 pvid
1
802.3 set
Syntax:
lldp tlvs-tx {enable | disable} option 8023 {mac-phy | power| link-aggregation| frame-size}
Parameters:
{enable | disable}
{mac-phy | power| link-aggregation| frame-size}
Mode
Interface Config
6.4.5 Port Command
admin-mode
Description:
Configure administrative mode on a port
Syntax:
Switch(Interface 1)# admin-mode {enable | disable}
Parameters:
Switch(Interface 1)
{enable | disable}
Mode
Interface Config
auto-negotiate
Description:
Configure auto-negotiate mode on a port
Syntax:
auto-negotiate
{enable | disable}
Parameters:
{enable | disable}