PLANET WGSW-5242 - Manual (Page 232)

User’s Manual of WGSW-5242
232
This command create a multicast group.
Syntax:
set static-mcast name <WORD> add vid
<vlan-ID> mac <mac-addr>member port <port list>
Parameters:
<vlan-ID>
<mac-addr>
<port list>
Mode
Global Config
set static-mcast name <WORD>delete
Description:
This command delete a static multicast group.
Syntax:
set static-mcast name <WORD>delete
Mode
Global Config
6.3.14 SNMP Command
snmp notify
Description:
This command configures snmp notification.
Syntax:
snmp notify
{enable|disable}
Parameters:
{enable|disable}
Mode
Global Config
snmp group add
Description:
This command create a snmp group.
Syntax:
snmp group add
<WORD>version <1-2>
Parameters:
<WORD>
<1-2>
Mode
Global Config