Vlan pvid, Interface commands – PLANET WGSW-5242 User Manual
Page 278
Advertising
User’s Manual of WGSW-5242
278
Parameters:
{enable|disable}
Mode
Interface Config
vlan pvid
Description:
This command configure port PVID.
Syntax:
vlan pvid
<pvid>
Parameters:
<pvid>
Mode
Interface Config
Example
Switch(Interface 1)# vlan pvid 1
Interface commands
Description:
This command is used to change to another interface
Syntax:
Interface
commands <port number>
Parameters:
<port number>
Mode
Interface Config
Example
Switch(Interface 1)# interface g1
Advertising