Port triggering – PLANET WNAP-1260 User Manual
Page 101
User’s Manual of WNAP-1260
-93-
Figure 8-34
Object
Description
Service Name:
Select a service type
Protocol:
The protocol used at the mapping port. You can select TCP/UDP,
TCP, or UDP. It is recommended to use TCP/UDP if you do not
know which protocol should be used.
Starting Port:
After the connection to the mapping port is established, the
corresponding port is open and the application can initiate
subsequent connection requests to the open port
Ending Port:
Set the end port of the mapping port range
Service IP Address:
Enter the IP address of the computer that provides services
After finishing settings, click Apply to save the settings.
8.8.2. Port Triggering
Certain applications, such as WAN network games, video conferences, and network calls, require
multiple connections. Because of the firewall setting, these applications cannot work on a simple NAT
router. However, certain special applications enable the applications to work on an NAT router.
When an application sends a connection request to a trigger port, the corresponding ports are open for
later connection and service provision.
Choose Network Application > Port Triggering and the Port Triggering page is displayed.
Figure 8-35