PLANET WNAP-1260 - Manual (Page 86)

User’s Manual of WNAP-1260
-78-
(5) L2TP
If the ISP provides the user name and password for L2TP dialup, select L2TP.
Figure 8-11
For details of parameter settings for this page, refer to previous parameter descriptions for PPTP.
8.6.3. DHCP Server
Choose Network Settings > DHCP Server and the DHCP Server page is displayed.
DHCP refers to Dynamic Host Configuration Protocol. If Use Device as DHCP Service is selected,
WNAP-1260 automatically assigns IP addresses to comupters in the LAN. Users do not need to
configure TCP/IP protocol paramters such as the IP address, the subnet mask, the gateway, and the
DNS server information for computers connected to the router’s LAN.