Chapter 7. web configuration for the bridge mode, Bridge / ap mode topology, Hardware setting – PLANET WNAP-1260 User Manual
Page 56: Running status, System status
Advertising
User’s Manual of WNAP-1260
-48-
Chapter 7. Web Configuration for the Bridge Mode
7.1. Bridge / AP Mode Topology
7.2. Hardware Setting
Set the three-way switch on the side panel to AP after WNAP-1260 is powered on.
7.3. Running Status
Log in to the configuration page after the system is started.
Click Running Status and the extended navigation menu is shown as follows:
Click the submenu to enter a specific configuration page.
7.3.1. System Status
Choose Running Status > System Status and the System Status page is displayed.
Advertising