PLANET WNAP-1260 - Manual (Page 151)

User’s Manual of WNAP-1260
-143-
Appendix A. Planet Smart Discovery Utility
For easily list the WNAP-1260 in your Ethernet environment, the Planet Smart Discovery Utility from
user’s manual CD-ROM is an ideal solution.
The following install instructions guiding you for run the Planet Smart Discovery Utility.
Step 1: Deposit the Planet Smart Discovery Utility in administrator PC.
Step 2: Run this utility and the following screen appears.
Step 3: Press “Refresh” button for list current connected devices in the discovery list, the screen is
shown as follow.
Step 3: Press “Connect to Device” button then the Web login screen appears.
1. In Repeater Mode, the IP address of LAN 2 (DHCP) assigned by DHCP server will be
listed in the table.
2. The LAN 2 (DHCP) only supported in Repeater Mode.
3. If cannot get the IP address from DHCP server or DHCP server is not existed, it will
displayed the LAN 1 (Static IP address).
4. In other Modes, WNAP-1260 only supported LAN 1 (Static IP address).