PLANET WNAP-1260 - Manual (Page 119)

User’s Manual of WNAP-1260
-111-
Figure 9-3
Select WDS Mode. Note that WDS function cannot be used if the channel is set to Auto.
9.6. Network Settings
Click Wired Network Settings and the extended navigation menu is shown as follows:
Click a submenu to perform specific parameter configurations.
9.6.1. LAN Interface Settings
Choose Network Settings > LAN Interface Settings and the LAN Interface Settings page is
displayed.
Figure 9-4
You can modify the IP address and IP subnet mask of the LAN port as required.
If you change the default IP address, you must use the new IP address to log in to the Web
configuration page of the router and the default gateway of all hosts in the LAN must be
set to the new IP address for internet access. The subnet mask of all hosts in the LAN
must be the same as the subnet mask specified in the LAN Interface Settings page.
9.6.2. DHCP Server
Choose Network Settings > DHCP Server and the DHCP Server page is displayed.